DS1 TN464F requirements?

[ryan47]

Hi Techs,
If there was never a DS1 present in the switch, does the tone clock have to changed from a TN2182c to a TN768? The processor is a TN2404 which i believe is a V9si. Is there some sort of a conflict? I know a DS1 TN464f has to be on rel.8.4 or higher. I may be wrong. Any advice will be greatly appreciated!

Thanks in Advance!

 

[simreal]

I would guess the only reason timing was set to the 2182 was because you didnt have the 464. Now that you have it I would set the timing to it.

I don't quite understand what the problem is however.

Can you explain what the issue is?

 

[ryan47]

Thankyou
Main problem is saying out of servive NE,,near end.

 

[Midstream]

Test board [BOARD LOCATION] and post the results.

 

[ryan47]

Im getting error codes 1, 8 , 11 , 16

 

[Midstream]

copy and paste the test results, please.

 

[ryan47]

Im using the terminal onsite and my laptop for this. I think i figured the problem. I need to add a processor to the second cab. There isnt any ports left for the data mod. Thanks for replying!