DS1 for QSIG To MM

[btrain8]

I have an S8700 CM 3.1 and am possibly moving to a DS1/QSIG config for my Modular Messaging. Does it matter if the DS1 boards are TN464 or TN767 or a mix? There will be 2.

 

[captainnick666]

i dont think so, i use 464's myself

 

[oldtimer27]

Avaya Configuration Note 3603 for Qsig to a Octel states a TN767 rev C or E will work.

http://support.avaya.com/elmodocs2/Octel/config/cn3603.pdf

 

[btrain8]

hmm, I looked at the config notes and they mention only 464's. Nevertheless, it's fine. I have them.

 

[Mitch672]

If you are using a G650's w/IPSIS, I don't belive you can setup a D channel on TN767's, only TN464s/TN2464's are supported.

Mitch


AVAYA Certified Specialist

 

[jimbojimbo]

Mitch is correct. The TN767 does not support a D-channel in the G650. You must use the TN464. Your vendor should have told you this.