DS1 Emulating Q931

[perchanski]

Hi , I have a DS! that emulates Q931 and connects on to a cisco router, all works well incoming and outgoing, but is there anyway I can insert a 9 for outgoing instead of the cisco router having to do it
? TIA

 

[dufus2506]

Sure. Just put it into the routing plan for calls going through that router for long distance.



Carpe dialem! (Seize the line!)

 

[perchanski]

Hi, It is actually the router that is making the calls, it is a kind of mock 2 meg link between many sites as a backup if the dedicated data circuit goes down. It uses the routing plan that extensions use, i cant seem to figure out a way of giving it its own route.

 

[Nick44]

set a second route up to the router trunk # in the standard route pattern.
Insert a 9 where needed.
I.E
route pattern 1
Trunk grp 1 FRL etc first choice
Trunk grp # (router trunk) FRL etc insert 9 secondchoice.


Speak softly and carry a big switch