Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DS1 Adapter

Status
Not open for further replies.
mgoston

mgoston

Programmer
Jul 13, 2004
106
US
I am using an external CSU and would like to know if anyone knows of an Amphenol to RJ-45 Adapter to connect from the back of the switch to the external CSU (RJ-45).
 
Sort by date Sort by votes
You will need a 356a adapter. This will fit on the 50 pin backplane connector. The adapter has 8 jacks. Use the 8th jack, this will give you the correct pinnouts.
 
Upvote 0 Downvote
I use an Allentel product ,AT153K-M8, it works well but the leads need to be soldered to the pins of the amphenol.


DonBott
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JOEDING
  • Locked
  • News
about avaya S8400 adapter
Replies
1
Views
293
AvayaTier3
AvayaTier3
Rosesam
  • Locked
  • Question
Device adapter sets stay as Uneq + Sip sets throw invalid extension and password
Replies
1
Views
120
Rosesam
Rosesam
bankingguy
  • Locked
  • Question
Egypt sample DS1 board configuration (Telecom Egypt)
Replies
1
Views
114
ZeroZeroOne
ZeroZeroOne
LineMann
  • Locked
  • Question
Help needed with Avaya definity g3 si ds1 country protocol
Replies
3
Views
117
biglebowski
biglebowski
sandeep77
  • Locked
  • Question
D channel for all DS1 board out of servive 1
Replies
15
Views
286
AvayaTier3
AvayaTier3

Part and Inventory Search

Sponsor

Back
Top