DS-30 on BCM450

[dibthree]

I am very familiar with the BCM 400, the splits, and the DS-30 buses and how they are assigned.

Does anyone if and know how they are different in the BCM450 R1?

Thanks in advance.

 

[Dasheen]

No 2/6 or 3/5 splits. No dipswitches to set.

 

[godslavesmith]

you have to define it in the element manager

 

[gberger]

4 buses on the cabinet starting with Bus 1 at the bottom and Bus 4 on top with all dipswitches set to On.
On the expansion cabinet(with the exp.port keycode applied) you assign all your mbm's and it will show you the dipswitch settings.Power off,set dipswitches,install your mbm's,power on and you should be good to go.