Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
drivers
- Thread starter Winfred
- Start date
First, which version are running. 3.2 can refer to all of the versions of openserver from the last 10 years.
uname -X should tell you the complete version number but most people just refer to the last few digits.
i.e 3.2.5.0.4 = 5.0.4
3.2.4.2 = 4.2
I haven't come across any drivers for zip drives but there is a skunkware package for cdrtools but it may be limited to using scsi cdr writers(not sure).
hth
unix42
uname -X should tell you the complete version number but most people just refer to the last few digits.
i.e 3.2.5.0.4 = 5.0.4
3.2.4.2 = 4.2
I haven't come across any drivers for zip drives but there is a skunkware package for cdrtools but it may be limited to using scsi cdr writers(not sure).
hth
unix42
- Thread starter
- #3
Skunkware was sco's distribution of gpl (gnu public licence) software.
Caldera has been screwing around with the sco web site so nothing is where it used to be ARGHHH!
here is a doc for the cdrtools
ftp://ftp2.caldera.com/pub/skunkware/cdrtools/SCO-NOTES.html
you can get the software here:
ftp://ftp2.caldera.com/pub/skunkware/cdrtools/
hth
unix42
Caldera has been screwing around with the sco web site so nothing is where it used to be ARGHHH!
here is a doc for the cdrtools
ftp://ftp2.caldera.com/pub/skunkware/cdrtools/SCO-NOTES.html
you can get the software here:
ftp://ftp2.caldera.com/pub/skunkware/cdrtools/
hth
unix42
- Status