Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Drive failure with no amber light?
- Thread starter Shux
- Start date
I am having the same problem. Array manager is telling me the array has been degraded but when i try to find out what disk has the problem disk maangement says all disk are ready. This morning is came in and had the failing drive blinking light on the front of the server but all the disks are blinking green. This is driving me nuts......
I ended up having to rebuild. could not determine status of second container in ctrl-a. status was please wait. dell tech had me remove drives change from raid to scsi and bak again insert the drive and same thing. I had a felling this was going to happen. thanks for the response
- Status
Similar threads
