DRG 22

[paoloitaly]

I am italian and I am sorry for my englis not good
I have instal the drg 22, analogic telephone work ok.
I have a problem with the second call to the analogic extension: when the extension analogic is busy, if I make a new call there are not the busy tone, ahd the analogic estension have a "beep message" for the new call.
Is possible to remove the beep and to give the busy tone for the second call?
Tank You
best reguard
Paolo

 

[parnum]

Check GEDIPIR=x; for CSP, then check dig2+3 of SERV in CSP =00. This is to switch off Call Waiting, may be your problem.

best parnum

 

[paoloitaly]

dig 2 e 3 of the serv are = 0,
maibe is there anoter problem

thanks for the help
best regard
paolo

 

[paoloitaly]

I have configure 1 phone DBC422-voip, with the same parameter of the DRG22, the digital phone work ok, if I call when is busy there is the busy tone, the analogue phone connect to DRG22 do not work ok, if I call when busy there are the free tone, and the analogue phone connect to DRG22 have a beep message for the new call. Maybe GESPI GEDII and IPEXI are ok, Is there another parameter for configure the function of the call for MD110? Is there any parameter to change in the DRG22?

Thank You for help,
best regard
Paolo

 

[fouesnant]

Hi

Check D1 of parameter SERV of the route (if you have problem with incoming calls). It should be set to 0

 

[paoloitaly]

Today I do not work,
Tomorrow I go to check the SERV of the route,
but I have not problem for to make calls with analogue phone, my problem is to receive: if I receiwe 2 calls, the first call is ok, but the second call do not give the busy tone, and the analogue phone receive a BEEP for information of another call. I prefer the second person call receive the busy tone. If I install 1 digital voip phone (DBC4222)this problem there are not.
I am italian, I am sorry for my englis not good.

Thank You for the help.

Paolo