bizsoftware1
Programmer
Hi,
has anybody succesfully setup draytel sip trunks, i am trying to setup on SOE I have added license but cannot get it to work, just wondered if anyone has done it and can lead me.
They do not run stun server, settings;
How do I set up other products for DrayTEL ?
The setup of your equipment or software will depend on that product and you should refer to its own documentation. The information you need is normally :
Registrar : draytel.org
SIP port : 5060
Username : 8xxxxx (the numeric part of your DrayTEL account, before the @draytel.org)
Outgoing Proxy : nat.draytel.org:5065 - Note : This should not be used unless your VoIP device is behind another firewall - only use it if that is the case and try without first. The Port number and outgoing proxy name might be entered separately, depending on the VoIP device you're using.
Is there an outgoing Proxy for DrayTEL ?
Yes. If you are using your SIP device behind a firewall, or NAT device, you may need to use the DrayTEL proxy instead of accessing DrayTEL in direct mode. To do this, set your outgoing proxy to nat.draytel.org:5065 (the exact method will depend on your VoIP/SIP device. Do not use the proxy if your VoIP device is on a public IP address. DrayTEL does not operate a STUN server (and equivalent method).
any help would be very much appreciated.
has anybody succesfully setup draytel sip trunks, i am trying to setup on SOE I have added license but cannot get it to work, just wondered if anyone has done it and can lead me.
They do not run stun server, settings;
How do I set up other products for DrayTEL ?
The setup of your equipment or software will depend on that product and you should refer to its own documentation. The information you need is normally :
Registrar : draytel.org
SIP port : 5060
Username : 8xxxxx (the numeric part of your DrayTEL account, before the @draytel.org)
Outgoing Proxy : nat.draytel.org:5065 - Note : This should not be used unless your VoIP device is behind another firewall - only use it if that is the case and try without first. The Port number and outgoing proxy name might be entered separately, depending on the VoIP device you're using.
Is there an outgoing Proxy for DrayTEL ?
Yes. If you are using your SIP device behind a firewall, or NAT device, you may need to use the DrayTEL proxy instead of accessing DrayTEL in direct mode. To do this, set your outgoing proxy to nat.draytel.org:5065 (the exact method will depend on your VoIP/SIP device. Do not use the proxy if your VoIP device is on a public IP address. DrayTEL does not operate a STUN server (and equivalent method).
any help would be very much appreciated.