Hallo,
I would like to recover a Windows2003 Server with Arcserve 9 and the ASR-Disk Method.
The Server has been saved with a Raid 5 (two log. Drives c: and d: over four 72 GB disks), now the Server has two Raid 1 Containers (each Container real 72 GB).
I think i have to edit the ASR-Disk because the DR-Process said:
Not enough hard disk space ... look for your disk ...
c: is about 4 GB, d: is about 2 GB used.
I dont know the total given size for the logical drives used by the last backup under Raid 5.
Any helpful suggestions are welcome.
Deleteing the Partinfo on the ASR-Disk was not successfully.
Thank you - FISI
I would like to recover a Windows2003 Server with Arcserve 9 and the ASR-Disk Method.
The Server has been saved with a Raid 5 (two log. Drives c: and d: over four 72 GB disks), now the Server has two Raid 1 Containers (each Container real 72 GB).
I think i have to edit the ASR-Disk because the DR-Process said:
Not enough hard disk space ... look for your disk ...
c: is about 4 GB, d: is about 2 GB used.
I dont know the total given size for the logical drives used by the last backup under Raid 5.
Any helpful suggestions are welcome.
Deleteing the Partinfo on the ASR-Disk was not successfully.
Thank you - FISI