Download IOS from Rommode commands 1

[matthias7]

Hi

My Cisco 851 will reach only rommon so i like to try to
download the IOS onto the router from my tftp server and in one page tells me
to define
IP_ADDRESS=XXX.XXX.XXX.XXX
IP_SUBNET_MASK=XXX.XXX.XXX.XXX
DEFAULT_GATEWAY=XXX.XXX.XXX.XXX
TFTP_SERVER=XXX.XXX.XXX.XXXX
TFTP_FILE=XYZ.BIN
tftpnld

does it mean that i will be using FE4 or any other port for the transfer of the BIN file since i can not find it anywhere but i like to think it will be using fe4 but like to be sure about that 1:st!!! ? ? ?

Matt

 

[brianinms]

It should be the lowest numbered port.

 

[PeterHurst]

I wasn't aware it had to be a specific port - I don't remember it being an issue.

From memory I recall it's easy to type the variables incorrectly expecially the filename - TFTPD32 is good for spotting that.

Other than that it should work fine.