Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Down AD-8 replaced with IM voicemail MWI not working on 2000
- Thread starter Antwis79
- Start date
belevedere
Instructor
It should be the same. Double check 1303, and the MW option in the mailboxes in the iM-16.
Also; enable AAInfo, CMD 08>702>0, 703>0, 704>0, 706>0, 1324> all VM ports set to 0, disable easy message access, log into sys admin console, go to sys>switch>switch info, add ema=0 to the end of integration options, save, reboot. We usually also add disabling ISM, in the same line add ISM=0. Under system>switch>MWI confirm it's ON with the proper on/off codes as per your system programming.
In CMD 200, an access code set to A040 is the MW set and A041 cancel. Whatever that code is needs to be in the iM-16.
Also; enable AAInfo, CMD 08>702>0, 703>0, 704>0, 706>0, 1324> all VM ports set to 0, disable easy message access, log into sys admin console, go to sys>switch>switch info, add ema=0 to the end of integration options, save, reboot. We usually also add disabling ISM, in the same line add ISM=0. Under system>switch>MWI confirm it's ON with the proper on/off codes as per your system programming.
In CMD 200, an access code set to A040 is the MW set and A041 cancel. Whatever that code is needs to be in the iM-16.
- Thread starter
- #3
- Status
Similar threads
