double space on monitor ibm3151 1

[timmy1]

Does any one know how to set single space on the ibm3151 monitor? Thanks
P.S. This is RS 6000 model J50.

 

[aixqueen]

Check under general to see if it is set up for auto lf off.....
Also check other params....

3151 CONSOLE parameters
Machine Mode____IBM3151
Operating mode ECHO
(opt.)Enter__RETURN
Screen_________NORMAL
Line Speed(bps) 9600
Return___FIELD
Row and Col_______24x80
Word length(bits)__8
New Line___________CR
Scroll____________ JUMP
Parity____________NO
Send_____________PAGE
Auto LF___________OFF
Stop Bit_____________1
Insert Char_____SPACE
CRT Saver__________ON
Turnaround chr______CR
LINE WRAP__________ON
(opt.) Interface__RS-232C
Forcing Insert_______LINE
Line Control______IPRTS
Tab____________FIELD
Break Signal(ms)____500
Send Null Suppress___ON

1-Press Ctrl-Setup and ensure the previous parameters
Use cursor keys to select any field
Use space bar to display each value
Press Send to get from a menu to the next one
2-Press Send to get to the FUNCTION menu
3-Select the SAVE option
4-Press the SPACE BAR to save any changes
5-Press Ctrl-Setup to exit Setup

 

[timmy1]

Thanks for your great help