Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
door phone and DOC in a BCM
- Thread starter senk1s
- Start date
Haven't set one up personally.
Nortel supported in BCM 3.5+
DOC is supported as per installation guide.
If you have a BCM3.5 to play with highlight the door phones button in unified manager click on help and you can download the installation guide.
There is a separate installation guide for the DOC
Nortel supported in BCM 3.5+
DOC is supported as per installation guide.
If you have a BCM3.5 to play with highlight the door phones button in unified manager click on help and you can download the installation guide.
There is a separate installation guide for the DOC
Yeah i set some up on BCM 3.5.
You need to program the doorphone after it is recognised by BCM.
You need to set up all the parameters corrrectly as per the door phone BST set up guide.
Make sure the Dn is set to handsfree.
It works in a tricky way letme know if ya get stuck
Bcpaul NYC
NY
You need to program the doorphone after it is recognised by BCM.
You need to set up all the parameters corrrectly as per the door phone BST set up guide.
Make sure the Dn is set to handsfree.
It works in a tricky way letme know if ya get stuck
Bcpaul NYC
NY
- Status
Similar threads
