Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DON'T ASK WHY 1

Status
Not open for further replies.

PERRYPJ

Technical User
Jul 5, 2002
4,323
US
Have a request from a customer to set up a DID number to access a page trunk, so I put the DID number in the IDC table and pointed it to the ACOD of the page trunk. I get a busy have checked TGAR NCOS. Have I missed anything, or will this just not work.
If you really want to know it's State Government.

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
ACOD usage in IDC is not correct solution. IMHO.

If any calls logs (DCH ?) on DID number?
 
Would have thought a TSC would work, as long as trunk transfer type is allowed in the NET_DATA
 
Just create a phantom with DID then DCFW 4 to acod and make sure the tgar and targ doent match.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top