Does WinRoute Pro support RRAS interface like on-demand VPN interface

[zenith518]

Hi :

my question is, i create a static route triggered on-demand dialup vpn and GRE tunnel interface under windows native rras, but i can not find these interfaces in the interface maintinance window, winroute seems does not support these special interface type, that's right?

Zenith

 

[pmf71]

Not sure about Winroute pro 4, but winroute firewall 6 will possibly accommodate your needs. KWF6 has built in VPN tunnel support and subnets can be routed through specific interfaces (VPN tunnels are also considered a (virtual) interface). It also supports dial-on-demand interfaces, like ISDN.
One possible drawback: kerio VPN tunneling is indigenous. It has it's own protocol, so you'd need another winroute machine on the other side. Bright side of this is that it's very safe.

You can download a trial version of the software on the kerio site. It's valid for a month or so, enough time to do your testing.

 

[zenith518]

Thanks for your answer!
I check the kfw6, after I create the rras IPinIP interface(GRE Tunnel), I still can not find the interface appears in the interface panel of the kfw6.
Kfw6 using it's own VPN solution, but I prefer the windows 2k server native vpn support. That's no license problem with my situation.
and I also has the much smaller and effecient winroute pro for firewall function, although it is not stateful, but I still can handle that manually.
Do you know is there any other firewall which fully native support win2k server rras vpn interface functionalities. I try some others , but they still can not support.

That pitty!

Regards,Zenith

 

[pmf71]

You can make a dialup vpn adapter in windows (and have it do an initial ISDN dial-up aswell), and then add that interface in KWF6. I think that should also work in winroute pro. You can then configure it to do dial-on-demand.