Does this look like a hardware problem causing ini?

[omarrj]

My option 11c randomely ini's and this is the message I get. The docs show the ini message as PE fault. Can anyone shed some light on this?
thx

REQ PRT
TYPE AHST
% SYSDB RLS/ISS: 550J LOADED FROM C: DATE/TIME: 11/3/2011 19:37:26 RECS: 118 SEQ
NO: 2115
% SYSLOAD ISSUE 5.50J: IDLE_SET_DISPLAY CITY TV
% ELAN019 ELAN Server enabled after M1 INIT
%
% DSET000 DOWN LOAD 1562 0 156 2 0 0 0 418663
%
% INI003 000000B0 000000B4 000000B8 000000BC 000000CE 000000D0 000000D4 000000D8
000000EE
%
%
% INI003 000000EF
%
% SRPT752 INI 0: INI completed in 25 seconds
%
% DTC105 0

 

[GHTROUT]

It is Sysloading. I would be more interested in what prints out 'before' this.

Sysload clears the history, so you lose the output that was prior to the event.

--
Nortel Resources at GHTROUT.com
--

 

[PERRYPJ]

DO YOU HAVE A 2ND CABINET

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[omarrj]

yes it does have a second cabinet

 

[PERRYPJ]

Your going to have to leave Your TTY port open on it and let it print to capture file or to a printer just make sure you have MTC in the USER part of the TTY.

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[omarrj]

thx

 

[Tman45]

Can't Nortel(Avaya) decode the hex to see what it points to? There are a few on this forum that can tell you exactly too. Might not be enough info to go on though. I would say be careful if your company is doing any type of 'scanning' as it may be touching the ELAN and causing issues. (at least we had that happen here). But yes, this could be a PE issue and not network. We had a 4.5 system that was sysloading and it ended up being a faulty SSC and daughterboard.

 

[Reusser]

Will need to see the PDT log files to see what is happening.

If you have Pass - you can have Avaya do an RCA (root cause analysis)

If not - only way we call tell what is happening is to see the PDT logs