Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Does the system have HMC or not? 2

Status
Not open for further replies.

Mag0007

MIS
Feb 15, 2005
829
US
How does one know if a system is being managed by a HMC?

TIA
 
Check if the rmcd daemon is running or not by the command
ps -ef|grep -i rmcd. This daemon runs only when HMC connects to a partition.
 

On the front display, menu 1, it will say HMC=1 or 0 (managed or un-managed)
 
you can check it running command:

/usr/sbin/rsct/bin/lsrsrc IBM.ManagementServer

regards,r,m.
 
Thanks everyone for their replies.

How do I know what HMC I am using, is there a way to determine the HMC's hostname/ipaddress from a managed system?

UnixFreak:
Where is this menu at? I don't have an option to reboot currently...

TIA

 
Run this command to get the IP of your HMC
/usr/sbin/rsct/bin/lsrsrc IBM.ManagementServer hostname

Then nslookup (IP address what you got above) , you will get the name of the HMC

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top