Does IP500V2 support R11.1 ? 1

[rgunther]

Hey guys - We currently have an IP500V2 on R11.0.4.6 with VMPRO on a win2019 server. It is possible to bring this up to release 11.1? I was told that R11.1 was for server edition only? Is this true? Thanks,

 

[Okkie26]

IP Office Unit Firmware Version
--------------------------------------------------
IP 500v2 11.1.2.0.0 build 239
POTSV2 Module 11.1.2.0.0 build 239
DCPV2 Module 11.1.2.0.0 build 239
ATM Module 11.1.2.0.0 build 239
DS30/16 V2 Module 11.1.2.0.0 build 239
DS30A/16A BST Module 11.1.2.0.0 build 239
DS30B/16B Module 11.1.2.0.0 build 239
DS30B/16B BST Module 11.1.2.0.0 build 239

 

[rgunther]

So yes it looks like it is supported on the IP500v2, but I think the VMPro was our issue? Being that we are on VMPRO 11.0.4.6 using a windows server, I think this would have to get migrated to an applications server? Does this sound correct? Thanks for the input.

 

[Okkie26]

Yes. No more VM pro @ windows.

 

[ipohead]

See this thread

It is Linux based but you don't really need any Linux knowledge.

 

[tac84]

Running the latest R11.1 FP2 on IPO 500v2 without issues. I don't have Voicemail pro though just Essential Edition.

Thanks, Tim
Adelaide, Australia

 

[budbyrd]

I wrote up a 'few how' to guides for migrating from windows to the app server. Give them a read.

https://www.tek-tips.com/faqs.cfm?fid=8147

https://www.tek-tips.com/faqs.cfm?fid=8149

https://www.tek-tips.com/faqs.cfm?fid=8150

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'