Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
does anyone remember the boss to sec intercom feature??
- Thread starter BTCom
- Start date
Is this what you are looking for?
xx DIG yyyy zz R/V di-1
Dial Intercom Group key
Where:
• yyyy = group number, from 0-253. For Release 13
and later from 0-2045.
• zz = member number from 0-99. The zz value
cannot be equal to or share the first digit of a 2
digit number with the SPRE code. For example, if
SPRE = 1, zz cannot be 1, 10, 11...19.
• R = Ring option
• V = Voice option
Must have maximum number of Dial Intercom Groups
DGRP defined in LD 15.
If any member in a group has a two-digit member
number, then all members have a two-digit number. The
system adds leading zeros to other entries.
Prompted with Dial Intercom (DI) package 21.
xx DIG yyyy zz R/V di-1
Dial Intercom Group key
Where:
• yyyy = group number, from 0-253. For Release 13
and later from 0-2045.
• zz = member number from 0-99. The zz value
cannot be equal to or share the first digit of a 2
digit number with the SPRE code. For example, if
SPRE = 1, zz cannot be 1, 10, 11...19.
• R = Ring option
• V = Voice option
Must have maximum number of Dial Intercom Groups
DGRP defined in LD 15.
If any member in a group has a two-digit member
number, then all members have a two-digit number. The
system adds leading zeros to other entries.
Prompted with Dial Intercom (DI) package 21.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question