Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Does anyone have docs on setting up Cisco SPA2102 as a 3rd party endpoint on IPO?
- Thread starter shadow181
- Start date
- Thread starter
- #2
Got the unit to come up localy, with the following settings.
How to set up SPA 2102 as a 3rd party SIP endpoint on IP Office.
1.Start up the phone and identify its IP Address using the menu key on the phone, go to the "Network" option and press the "Select" button. For this example we will assume the IP Address of the phone is 192.168.0.1, and IP Address of IP Office Phone System machine is 192.168.7.99
(To retrieve the IP Address on the Linksys SPA 2102, pick up the handset, dial **** to get to the menu, and dial 110# to get the IP Address)
2.Point your browser to the web interface of the phone:
3.Click on the "Admin Login" link, and next click on the "Advanced" link at the top of the page to the phone's advanced administration page
4.We now need to set the phone to register with IP Office Phone System. Click on the "Line 1" tab, and configure as follows:
a. Set the "Line Enable" field to "yes
b. In the "Proxy and Registration" section, set the "Proxy" field to the IP Address of the IP Office Phone System machine in this example, 192.168.7.99. (If you would like to specify the FQDN of the IP Office PhoneSystem machine instead of the IP Address.
c. In the "Subscriber Information" section:
i. Set the "Display Name" field to the name you want to appear on the Phone display
ii. Set the "User ID" field to the extension number you want to associate with this phone
iii. Set the "Password" field to the extension's Authentication Password
iv. Set the "Use Auth ID" field to "yes"
v. Set the "Auth ID" field to the extension's Authentication ID
d. In the "Dial Plan" section, set the "Dial Plan" field to "*x.T|#x.T|x.T" (without the quotes)
5. Set up you WAN section to connect to the desired internet connection. In our case we are using a static IP on the local network.
How to set up SPA 2102 as a 3rd party SIP endpoint on IP Office.
1.Start up the phone and identify its IP Address using the menu key on the phone, go to the "Network" option and press the "Select" button. For this example we will assume the IP Address of the phone is 192.168.0.1, and IP Address of IP Office Phone System machine is 192.168.7.99
(To retrieve the IP Address on the Linksys SPA 2102, pick up the handset, dial **** to get to the menu, and dial 110# to get the IP Address)
2.Point your browser to the web interface of the phone:
3.Click on the "Admin Login" link, and next click on the "Advanced" link at the top of the page to the phone's advanced administration page
4.We now need to set the phone to register with IP Office Phone System. Click on the "Line 1" tab, and configure as follows:
a. Set the "Line Enable" field to "yes
b. In the "Proxy and Registration" section, set the "Proxy" field to the IP Address of the IP Office Phone System machine in this example, 192.168.7.99. (If you would like to specify the FQDN of the IP Office PhoneSystem machine instead of the IP Address.
c. In the "Subscriber Information" section:
i. Set the "Display Name" field to the name you want to appear on the Phone display
ii. Set the "User ID" field to the extension number you want to associate with this phone
iii. Set the "Password" field to the extension's Authentication Password
iv. Set the "Use Auth ID" field to "yes"
v. Set the "Auth ID" field to the extension's Authentication ID
d. In the "Dial Plan" section, set the "Dial Plan" field to "*x.T|#x.T|x.T" (without the quotes)
5. Set up you WAN section to connect to the desired internet connection. In our case we are using a static IP on the local network.
- Thread starter
- #3
- Status
Similar threads
- Question