MrToad6378
Technical User
Do you have to leave Symposium logged in with Admin or NGenSys all the time. Someone told me you have to.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Do you have to leave Symposium logged in all the time
- Thread starter MrToad6378
- Start date
- Status
You can leave your SCCS server after a reboot all alone if you would like. The services will start automatically. However I would recommend that you log in with ngensys anyway. Having the server logged in will give you access to logs that will help in maintanence on the server.Better to be pro-active than reactive with symposium.
I can interpret this a few ways for Symposium Express:
- server logged in - yes, for all the services to run and calls to route
- logged in to client running on server - no, but you won't see the alarm monitor if you don't have it running and that can be helpful
- logged in to client running on workstation - if you use scheduled reports, the report listener service must be running and that is only running if the client is running.
Post more specifics if you are not getting the information you need...
- server logged in - yes, for all the services to run and calls to route
- logged in to client running on server - no, but you won't see the alarm monitor if you don't have it running and that can be helpful
- logged in to client running on workstation - if you use scheduled reports, the report listener service must be running and that is only running if the client is running.
Post more specifics if you are not getting the information you need...
- Status
Similar threads
- Question
- Locked
- Question
