What is the proper way to configure DNS and/or WINS to properly use VPN? We are using the Cisco VPN client through a Cisco PIX, the firewall and client are configured but when you access the network via the VPN, hostnames are not resolved, just IP addresses. Anyone have any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DNS/WINS configuration for VPN
- Thread starter joey74055
- Start date
The pix issues a dhcp ip to the cisco vpn client. Add your internal dns servers to that dhcp lease.
RoadKi11
"This apparent fear reaction is typical, rather than try to solve technical problems technically, policy solutions are often chosen." - Fred Cohen
RoadKi11
"This apparent fear reaction is typical, rather than try to solve technical problems technically, policy solutions are often chosen." - Fred Cohen
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question