DN's on different switches

[gagz]

I just want to make sure I have this scenerio right... Here's my companies current setup:

Corp Office: Option 61c
Remote Office 1: Option 11c
Remote Office 2: Remote Office 9150

I understand that remote office 2 is basically an extension off of our corporate office because the 9150 basically just extends the 61c out. But for users in remote office 1 that have 2nd desks in our corporate office, there is no way to have their extension on both desks correct? They theory we have gone by is that this would confuse 4 digit dialing between sites, etc. Currently all Remote Office 1 extensions are built on the 11, and all Corporate office and 9150 sets are built on the 61. This makes sense right?

I just want to know, based on fact, that i can tell a user this isn't possible.

Thanks.

 

[acewarlock]

The users at remote site 2 on the 9150, could also have a phone with the same numbers at the HQ and they both would ring at the same time. The users at site 1 can't as it is setup today without spending money.

 

[johnpoole]

ace is right, the 9150 sets are built in the 61, i use mcr for that and can add dn's both tdm and voip.. the opt 11 needs it on number group.. on one of my remote 11's i send all the 5200 numbers over as a dsc.. they get mail and lamps and names but can't have a 52xx numbers on both switches.. or use pick between the two.. other then those two notes it's one switch

john poole
bellsouth business
columbia,sc