Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DN Rings busy when caller on phone aswering call

Status
Not open for further replies.

tikiturtle

Technical User
Sep 26, 2002
43
CA
I have a users who just recently started complaining that when she picks up calls on 7229 - that anyone else who calls that number while she's on the phone gets a busy signal. The programming looks fine - I don't know what else to look for?? Much Thanks!!
TN 013 0 00 11

DATE

PAGE

DES


DES 2616
TN 013 0 00 11
TYPE 2616
CDEN 8D
CUST 0

AOM 0
FDN 6100
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU

LNRS 16
XLST
CLS CTD FBA WTA LPR MTD FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD
CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT 6100
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 7224 0 MARP
01 SCR 8224 0 MARP
02 AO6
03 TRN
04 CFW 4 6100
05
06 MWK 6100
07
08 SCR 7299 0 MARP
09 ADL 16
10 ADL 16
11 ADL 16
12 ADL 16
13 ADL 16
14 ADL 16
15
 
you would have to add another line on key 9 scr xxxx. than set lhk to 9
 
the incoming call search idle keys begin in the key 0 trought the key specified in the LHK prompt.
If you have the key 8 busy and the LHK is 1 and if you don´t have other key more up, then you obtain busy tone.

Javier
 
Sorry - I typed in the wrong info - I meant to type 7299. Should I change the LHK to 8 now? What about my prime DN 7224 will that be affected?
 
that is a major problem, take it out and put it back in. i assume that 6100 is an acd for mail, that should never be busy, maybe just ring no answer, but with hta abd hunt 6100, that phone should never be busy

john poole
bellsouth business
columbia,sc
 
Thanks for the tips - I changed the LHK to run to button number 8 where 7299 was - it works now!!

Thanks again!
 
You should have just been able to use LHK 0 to use Short Hunt...will go to HUNT DN right away
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top