DN name is displayed not names on nortel phones 1

[_LONERANGER_]

hello friends
the problem which i am facing is recently i upgraded my nortel to cs1000 and previously on Nortel phones the DN and NAME used too display on extension but now we can only see the DN but not the NAMES i checked CNDA ADD TDD DNDA all are there can anyone help me please
below the CLS of one of the phones


TYPE 1140
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 00001
CUR_ZONE 00001
MRT
ERL 0
ECL 0
FDN
TGAR 8
LDN NO
NCOS 2
SGRP 0
RNPG 42
SCI 0
SSU
LNRS 16
XLST 0
SCPW 1234
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FND HTD TDD HFA CRPD
MWD LMPN RMMD AAD IMD XHD IRD NID OLD VCE DRG1
POD SLKD CCSD TENA SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFEA RCBD
ICDD CDMD LLCN MCTD CLBD AUTR
GPUA DPUD DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTA AHD DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
FDSD NOVD VOLA VOUA CDMR PRED RECD MCDD T87D SBMD
KEM3 MSNV FRA PKCH MUTA MWTD DVLD CROD ELCD VMSA
AUTH 1
2
3 10044
4
5
6
CPND_LANG ENG
HUNT
TEN 1
PLEV 02
PUID
UPWD
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 50250 0 MARP
CPND
CPND_LANG ROMAN
NAME NETWORK L1
XPLN 27
DISPLAY_FMT FIRST,LAST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 16 71109773560212
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31

 

[Firebird Scrambler]

I'm not sure if the following below is related?

There are some call flows in a mixed CS1000 / Communication Manager (CM) environment where name display is not being updated as expected over SIP trunks.
For example
1. CS1000 user calls CM user #1; CM user #1 answers and transfers the call to another CM user #2; however CS1000 still displays name of the first CM user #1.
2. Incoming ISDN (NI-2) call to CS1000 user is routed via CM – calling name is not displayed as expected to called user.
In both cases CM forwards the name display update to the CS1000 via P-Asserted-Identity in a SIP UPDATE message; while CS1000 normally expects such information to be contained within Meridian Customer Defined Networking (MCDN) messaging.
ACT PEP MPLR29593 and GEN PEP MPLR33241 are available to download for CS1000 R7.6 software to resolve this issue, for customers in a mixed CS1000 / CM environment.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

 

[StanleySteamer]

Change DNDA to DNDD.
DNDA display the name of the dialed DN. That is rarely what anyone wants.

 

[_LONERANGER_]

Thankyou StanleySteamer i will apply and get back to you i think it might get solved..............

 

[_LONERANGER_]

hey StanleySteamer i want the name to be displayed on my extension when my phone is onhook then too i can only see only DN i want DN and name to be displayed of particular extension to know that to whom it belongs on desk

 

[StanleySteamer]

Sorry I'm not sure what you are asking or saying.
Is your problem happening with internal calls or only with outside trunk calls?
Maybe if you post the TNB of both phones and give example of the display you are seeing and the display you want to see.
Did this only start after the upgrade? What did you upgrade from and what are you on now?

 

[442pgs]

Check options in the IP sets. The default is number only.

 

[Wanebo]

On an 1140 set (what you printed out before) you can change the key label on the set itself to read whatever you want on any key except the prime DN key (key 0). Press the Services button. Then select Telephone Options. Arrow up until you see Change FeatureKey Label (I think it's 3 arrows up)and select that. Select Change FeatureKey Label and then press the key you want to rename and rename it.

 

[StanleySteamer]

Thanks Wanebo - I think you figured out what the question was!

 

[_LONERANGER_]

Thankyou guys actually the problem was with my phone it dosent support more than 10 characters