Diva Server 4BRI 8M PCI is not working with Trunk Mode! 1

[marbla77]

I try to integrate MD110 (TLU 79) with Diva Server 4BRI 8M PCI! but this connection is not working!
Does anyone have know the parameters to use with the TLU79 to connect with Diva Serwer 4BRI??
I tried some parameters but without success...:-(
I am using MD110 BC12.

Thanks a lot,
marbla77

 

[whosrdaddy]

what is the problem exactly?
could be a cabling problem.
show us RODAP:ROU=X; where x is your TLU79 route

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[marbla77]

My Route is programmed:

<ROCAP:ROU=17;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
17 0110000000000010 5 0000030001 0 30 128 01151515 211110000031 111100

<RODAP:ROU=17;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
17 SL60 H'00000214 H'11410000 H'06310000 NO

<RODDPEST=3997;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
3997 17 0005000000000250000000010 0 5 0 3997

In my opinion cable is ok.
When i try call to DivaSerwer, Fax daesn't work.

 

[marbla77]

My Route is programmed:

<ROCAP:ROU=17;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
17 0110000000000010 5 0000030001 0 30 128 01151515 211110000031 111100

<RODAP:ROU=17;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
17 SL60 H'00000214 H'11410000 H'06310000 NO

<RODDPEST=3997;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
3997 17 0005000000000250000000010 0 5 0 3997

In my opinion cable is ok.
When i try call to DivaSerwer, Fax daesn't work.