ITbrian226
IS-IT--Management
Is there anyway to set distinctive ringing in communication manager for 4610 IP phones? They would like a difference between internal and external calls.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
display system-parameters customer-options Page 5 of 11
OPTIONAL FEATURES
Tenant Partitioning? y
change tenant 1 Page 1 of 2
TENANT 1
Tenant Description:
Attendant Group: 1
Ext Alert Port (TAAS):
Night Destination:
Music Source: 1
Attendant Vectoring VDN:
DISTINCTIVE AUDIBLE ALERTING
Internal: 1 External: 2 Priority: 3
Attendant Originated Calls: external
COS Group: 1
display system-parameters features Page 6 of 18
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5 Auto Start? n
Conference Parties with Public Network Trunks: 6 Auto Hold? y
Conference Parties without Public Network Trunks: 6 Attendant Tone? n
Night Service Disconnect Timer (seconds): 180 Bridging Tone? n
Short Interdigit Timer (seconds): 3 Conference Tone? n
Unanswered DID Call Timer (seconds): Intrusion Tone? n
Line Intercept Tone Timer (seconds): 30 Mode Code Interface? n
Long Hold Recall Timer (seconds): 0
Reset Shift Timer (seconds): 0
Station Call Transfer Recall Timer (seconds): 0 Recall from VDN? n
Trunk Alerting Tone Interval (seconds): 15
DID Busy Treatment: tone
Allow AAR/ARS Access from DID/DIOD? n
Allow ANI Restriction on AAR/ARS? n
Use Trunk COR for Outgoing Trunk Disconnect/Alert? n
7405ND Numeric Terminal Display? n 7434ND? n
[b][red]DISTINCTIVE AUDIBLE ALERTING
Internal: 1 External: 2 Priority: 3[/red][/b]
Attendant Originated Calls: external
DTMF Tone Feedback Signal to VRU - Connection: Disconnection: