georgep630
Technical User
I have a DHS-L system. How do you program distinctive ring on a CO button? This is used for a doorphone. Thanks for anyone's help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
distinctive ringing
- Thread starter georgep630
- Start date
- Status
If your system had the feature, it would be under:
system programming/ co line config (line number)/ distinctive tone.
But, I don’t think the DHS-L has the feature.
You can change the ring of a station via Feat#7, but I don’t think you can change a specific line.
system programming/ co line config (line number)/ distinctive tone.
But, I don’t think the DHS-L has the feature.
You can change the ring of a station via Feat#7, but I don’t think you can change a specific line.
- Thread starter
- #3
georgep630
Technical User
The customer says it use to ring differently for the doorphones (Viking W2000). The manual says under distinctive ring for stations as a side bar that it can can put on a programmable button but I can't make it work. I tried under feature key programming to add F#7 plus 1-4 but all it does is say that it is distinctive ring but ring at all then. Help. Trying to get it back like it was. By the way; this system does not impress me at all.
Customers are typically wrong about such things. At this point, if they really need to distinguish it from other calls, perhaps you could put some type of external ringer on for the door phone alert.
I cant understand what you are saying here:
"add F#7 plus 1-4 but all it does is say that it is distinctive ring but ring at all then"
Either way, F#7 is only for station level ringing, and does not effect individual CO lines on a system wide basis.
I know the manual mentions it, but the DHS-L is a discontinued model that was based on the DHS. The DHS had dist. ring at software level FP3. The mention of it in the L manual may have been a typo from the DHS manual. As I said above, if your system has the feature, it would be where I specified. Some versions of the L may have had it. Have you checked where I specified? (system programming/ co line config (line number)/ distinctive tone)
As for the system not impressing you, I feel the same way. In fact, I don’t even work on Vodavi anymore. I just answered your question because I figured nobody else would, as this forum does not get much activity compared to the others.
I cant understand what you are saying here:
"add F#7 plus 1-4 but all it does is say that it is distinctive ring but ring at all then"
Either way, F#7 is only for station level ringing, and does not effect individual CO lines on a system wide basis.
I know the manual mentions it, but the DHS-L is a discontinued model that was based on the DHS. The DHS had dist. ring at software level FP3. The mention of it in the L manual may have been a typo from the DHS manual. As I said above, if your system has the feature, it would be where I specified. Some versions of the L may have had it. Have you checked where I specified? (system programming/ co line config (line number)/ distinctive tone)
As for the system not impressing you, I feel the same way. In fact, I don’t even work on Vodavi anymore. I just answered your question because I figured nobody else would, as this forum does not get much activity compared to the others.
- Status
Similar threads