Displaying outgoing calls

[ColdNorth]

Hi, first of all , I'm not a Tech user when it comes to Definity. Our Techuser has "gone fishing".
Using a G3V8 sys.

I having a problem with sending out correct number.

On our ISDN PRI we have two different series 45880 and 49960.
I want to use Caller ID number to be send to outgoing calls. But know it only shows 45880, even when i dial from a 960 station. I have send connected number on the thunk. Tried to set a station (965) in the isdn pub/unknown to change the CPN prefix to the number. And then when I did a list trace stat 965 it took the right number and idle the call, but on the called phone the 45880 number where displayed.

For all incoming calls the routing works perfect.

Does someone know where I shook look?

 

[4merAvaya]

Do 'change isdn public-unknown-numbering':
1) On the form define your extension length, in your case 5
2) Identify the prefix digits, i.e. 45 and 49
3) Add the CPN prefix digits
4) Define the CPN length (10)

Kevin

 

[ColdNorth]

I tried that on one station, but got the same wrong outgoing number.
When I do the list trace on that station it pick up the cpn prefix, but I get a alarm on the trunk? Can the trunk igore my settings i Pub-unknown-numbring ?

We previously had our outgoing number blocked at our provider (had a small telemarketing-company here). And then any incoming calls was displaying the correct trunk-name.
Now after we unblocked it shows the number rather the trunk-name.