Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Displaying IP and TN (LD 20)

Status
Not open for further replies.

goverd

ISP
Mar 1, 2006
19
CA
Hi

I would like to know which tn/dn is associated with an IP address. I'm trying to use LD 20 with IDU but I'm not sure about the lscu. Is there a command to display loop,shelf... ?
When we input TN's in the phones it looks like 99.89 for example, how would that translate to lscu?

Also I would like some pointers about linking a CSE1000 to a Asterisk PBX.

Thanks in advance
Marty
 
Go to ld 20, then
Req: PRT
TYPE: DNB
Cust: 0 (usually it is but you need to know)
DN: XXXX (enter the DN of the IP set)
<CR> to end of prompts, This will display the TNs associated to the Directory Number (DN).

We have an astrisk in our lab, another tech messes with it. I believe you could link via T-1 as E&M trunking. Must have a Digium T-1 card. No support that I know of for SIP trunking between the two.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top