Displaying IP and TN (LD 20)

[goverd]

Hi

I would like to know which tn/dn is associated with an IP address. I'm trying to use LD 20 with IDU but I'm not sure about the lscu. Is there a command to display loop,shelf... ?
When we input TN's in the phones it looks like 99.89 for example, how would that translate to lscu?

Also I would like some pointers about linking a CSE1000 to a Asterisk PBX.

Thanks in advance
Marty

 

[kvepps]

Go to ld 20, then
Req: PRT
TYPE: DNB
Cust: 0 (usually it is but you need to know)
DN: XXXX (enter the DN of the IP set)
<CR> to end of prompts, This will display the TNs associated to the Directory Number (DN).

We have an astrisk in our lab, another tech messes with it. I believe you could link via T-1 as E&M trunking. Must have a Digium T-1 card. No support that I know of for SIP trunking between the two.