Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Display the ordering time of menu items on Micros 3700
- Thread starter JCCR
- Start date
yes I have done this few years ago on 3700 but cant tell you how to set it up.
Basically every time you send a round it puts the time stamp (date time ) on the check.
so when a customer says his burger has been 30 min open the check and see the time stamp. All items above the line was sent in that round.
This time stamp line does not appear on guest check.
Basically every time you send a round it puts the time stamp (date time ) on the check.
so when a customer says his burger has been 30 min open the check and see the time stamp. All items above the line was sent in that round.
This time stamp line does not appear on guest check.
Hopefully someone else knows of a better way but as far as I know it's not easy.
The menu items are stored in the micros db under micros.dtl but the timestamps there are for the 'transaction/round' (I.e. when the check is opened/picked up until it's service totaled) and not the time each individual item is rung on.
In the past when I've needed this its ended up being an ISL script that listens to the MI & MI_VOID events and logs the items/times to a custom db table.
The menu items are stored in the micros db under micros.dtl but the timestamps there are for the 'transaction/round' (I.e. when the check is opened/picked up until it's service totaled) and not the time each individual item is rung on.
In the past when I've needed this its ended up being an ISL script that listens to the MI & MI_VOID events and logs the items/times to a custom db table.
- Thread starter
- #4
microslady
Vendor
themicroslady.com
- Status