Display Resolution is Invalid 1

[frankstan]

When rebooting my NT4 server I get the following: The Currently Selected Display Resolution is Invalid" I did a search and came up with a Microsoft KB article 277826, which states, remove the basevideo subkey if it exists under HKEY_LOCAL_MACHINE\currentcontrolset\control\graphicsdriver
and reboot. I've done as the KB suggests but the subkey keeps repopulating after the reboot and I still get the same message.

 

[Griffyn]

Try updating the video driver. Ensure you've got the correct model installed.

 

[frankstan]

Thanks Griffyn but I've reinstalled the video driver using the most recent and older version and still get the same error.

 

[ChrisRAnthony]

I know this sounds like teaching grandma to suck eggs, but I have seen a similar problem when the refresh rate has been set to the wrong value. In this case the VDU did not support this refresh rate and was giving this error message.