I have a few T7316 phones that keep showing only the digit '1' when a call come into a phone instead of displaying the caller ID as all other phones on this site do. The only way to get rid of it is to unplug the phone and plug it back in but this is only atemporary solution beacuse the digit comes back after the next incoming call. I have also had these phones show digit'2' after placing an outbound call.
Is it a bad set of phones or a "ghost in the system"?
Any ideas would be helpful. This is on a MICS 5.0 with six fiber station modules and one fiber trunk module. None of the trunks in the fiber trunk module are in use for inbound or outbound calls yet.
Is it a bad set of phones or a "ghost in the system"?
Any ideas would be helpful. This is on a MICS 5.0 with six fiber station modules and one fiber trunk module. None of the trunks in the fiber trunk module are in use for inbound or outbound calls yet.