I have a 2250 switchboard phone that was moved from our fourth floor to the first. All they moved were the cables, so no programming changes were made. It will not display the name or numbers of incoming callers now, however. Do you know how I can get that back?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Display on 2250 switchboard phone
- Thread starter raeberak4
- Start date
tnphoneman
Vendor
How about the power TN's?
Sounds like cross connects are not correct.
Signature===========================================
Aastra Authorized Reseller
Sounds like cross connects are not correct.
Signature===========================================
Aastra Authorized Reseller
- Thread starter
- #4
TN 020 0 00 12
TYPE 2250
CDEN 8D
CUST 0
SGRP 0
SETN 020 0 00 13
ANUM 01
IADN
ALPD NO
SSU
ICDR ICDD
ABAN ABDD
CPND CNDA
AADN
DNDI DNDA
DAPC DAPA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 DPD
KEY 03 DPS
KEY 04 PRK
KEY 05 PAG 6111
KEY 06 EES
KEY 07 DCW
KEY 08 ADL 7667
KEY 09 ADL
KEY 10
KEY 11
KEY 12
KEY 13
KEY 14
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 8 JUL 2002
TYPE 2250
CDEN 8D
CUST 0
SGRP 0
SETN 020 0 00 13
ANUM 01
IADN
ALPD NO
SSU
ICDR ICDD
ABAN ABDD
CPND CNDA
AADN
DNDI DNDA
DAPC DAPA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 DPD
KEY 03 DPS
KEY 04 PRK
KEY 05 PAG 6111
KEY 06 EES
KEY 07 DCW
KEY 08 ADL 7667
KEY 09 ADL
KEY 10
KEY 11
KEY 12
KEY 13
KEY 14
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 8 JUL 2002
I bet a change was made or the move just made people notice it. Here's where to look:
LD 21
REQ PRT
TYPE ATT_DATA
OPT <--- Look here for XDP
If you see it, that's whats wrong
LD 15
REQ CHG
TYPE ATT_DATA
OPT <--- Just type IDP
- Now as to why this occurred:
Someone inadvertently typed the word "yes" at an OPT prompt in LD15. On your touch tone dial YES and XDP are the same digits, right? The programming mnemonics are based on the dial letters.
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
LD 21
REQ PRT
TYPE ATT_DATA
OPT <--- Look here for XDP
If you see it, that's whats wrong
LD 15
REQ CHG
TYPE ATT_DATA
OPT <--- Just type IDP
- Now as to why this occurred:
Someone inadvertently typed the word "yes" at an OPT prompt in LD15. On your touch tone dial YES and XDP are the same digits, right? The programming mnemonics are based on the dial letters.
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
- Thread starter
- #6
It has IDP
TYPE ATT_DATA
CUST 00
OPT AHA BIND BIXA BLA
DNX IC1 XTG IDP XLF XBL
FKA MWUD LOD
REA SYA ATDA
ATDN 0
NCOS 7
CWUP YES
CWCL 0 0
CWTM 0 0
CWBZ YES YES
EFLL 0
MATT NO
RTIM 30 30 30
ATIM 0
AQTT 0
AODN
SPVC 00
SBLF NO
RTSA RSAD
SACP NO
ABDN NO
IRFR NO
XRFR NO
IDBZ YES
PBUZ 02 10
ICI 00 LD0
ICI 01
ICI 02 DL0
ICI 03 RLL
ICI 04 INT
ICI 05
ICI 06
ICI 07
ICI 08
ICI 09
RICI
TYPE ATT_DATA
CUST 00
OPT AHA BIND BIXA BLA
DNX IC1 XTG IDP XLF XBL
FKA MWUD LOD
REA SYA ATDA
ATDN 0
NCOS 7
CWUP YES
CWCL 0 0
CWTM 0 0
CWBZ YES YES
EFLL 0
MATT NO
RTIM 30 30 30
ATIM 0
AQTT 0
AODN
SPVC 00
SBLF NO
RTSA RSAD
SACP NO
ABDN NO
IRFR NO
XRFR NO
IDBZ YES
PBUZ 02 10
ICI 00 LD0
ICI 01
ICI 02 DL0
ICI 03 RLL
ICI 04 INT
ICI 05
ICI 06
ICI 07
ICI 08
ICI 09
RICI
Hmmm. OK.
In that case, you can verify the wiring is right from this:
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
In that case, you can verify the wiring is right from this:
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
- Thread starter
- #8
I concur - the display is probably defective.
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
- Status
Similar threads
