Display incorectly on ISDN terminal

[lanpham_imported]

I have a tieline between an Ericsson MD110 and OPENSCAPE 4000V8 by ISDN Trunk.
Extensions at the Openscape4000v8 (SIP,HFA Extension) call Extensions at MD110 (DTS, ATS, ISDN extension).
Calls from the Openscape4000v8 extensions are display correctly on DTS extensions, ATS extensions. But not correctly on ISDN extension, add to 2 digits “00”. Eg it shows 0040100 instead of 40100 (I don’t want to display 2 digits “00” at pre)
Note: If I use a R2 trunk between MD anh 4000V8, display correctly on all of extension
Help me making this config display extension number on ISDN terminal from 4000v8’ extension.

ISDN extension and Trunk parameter bellow:

ROCAP:ROU=7;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
7 011001250000001 5 0110000001 0 30 128 00141405 511100000131 111110
END

RODAP:ROU=7;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
7 SL60 H'00000310 H'15400000 H'06300000 NO
END


SUDIPIR=42600;
DIRECTORY INFORMATION AT 11:22:56 18MAR20
DIRECTORY NUMBER : 42600
TYPE OF DIRECTORY NUMBER : ISDN
NAME :
EXTENSION TERMINAL DATA
EQU TERMD ADN
3-3-72-00 0000
EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG
54 00131305 00001000 011081111 000001 10101201 -
GROUP DATA
GROUP CALL PICKUP: 0001
DIVERSION DATA
PAGING DATA
END

Your assistance will be appreciated.

 

[HuyPbx]

As I know you this system i heard before. So input input RODDP for more verification. CBĐTU right ?