disntintive ring for Doorphone 1

[senk1s]

Is there a way to do this on a BCM3.7?

thanks

 

[biv343]

I think you might be able to have the doorphone call a hunt group, and assign a different ring pattern to the hunt group.

 

[senk1s]

thank you very much ...that'll be a perfect solution.
i'm going to try that

 

[senk1s]

disntinctive ring worked ... however the huntgroup overflow to another huntgroup is not working from Doorphone (testing on a 3.6)

Station A(6120) calls HG01(6122) overflows to HG02(DN6124)

Doorphone(6121) calls HG01(6122) stops ringing at the overflow timer

Have rebooted the BCM and tried as well
Any suggestions? thanks

 

[senk1s]

figured it out ... just in case someone else gets stuck

The parameter "Ring Delay" is when the door phone hangsup the call. valid range 1-60
(i had it at too small a value)