Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

disksuite mirror D0 to D2 and D1 to D3

Status
Not open for further replies.

csgonan

MIS
May 2, 2007
118
US
I have a Sun Solaris 10 v240 with 4 disks. I want to mirror my root disk 0 to disk 2 with disksuite (svm). I am not using ZFS. There is also 1 partition on disk 1 that I want to mirror to disk 3.

Can I include that in my initial configuration or can I only do disk 0 to disk 2? If I can do this, can I set up a different state database on disk 1 and disk 3 and just create the mirror like I did for the root drive?

Thank you.
 
my friend,

you are working in a very critical part. if you want me i can send you the complete procedure for this task. just send me the partition table of the two main disks. i will send you the procedure whenever i receive what i want.

regards,
/houssien
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top