My nt workstation recently told me I had a missing or corrupted c_1252.nls file on startup after selecting boot option. I used the NT disc to repair it and now it says Disk config error, cannot read from boot disk. Is this because it overwrote the sp6a files? Does it have something to do with extending the partition size to the full 40gigs of the drive( this was done much earlier and had been working fine)? Any ideas would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disk Config error, cannot read from disk
- Thread starter samelmer
- Start date
- Thread starter
- #2
I worked this one out myself. for some reason the boot.ini file was stuffed. All I did was reboot with the CD press R to repair the unchecked everthing except inspect startup environment. Poblem is now I get BSOD after pressing ctr+alt+del to log on. I think this is because I am using novell client and I have over writen the sp6a files.
- Status
