Disconnect tone

[kmaksimo]

Hi,
I'm trying to figure out how to change the disconnect tone on a 500 type in a Opt 61c Meridian to match the disconnect tone of the standard PSTN line in Italy. I found that LDTA must be set in the cls for that TN but after that I get a long disconnect tone instead of a pulsing one.Can anyone help ? Thanks

 

[johnpoole]

ld 56 flex tones and cadence, you'll need the cadence table from your local switch then change the roh tone to match that.

john poole
bellsouth business
columbia,sc

 

[kmaksimo]

Many thanks John Poole, we managed to sync the tone .
For those who has the same need here is the modification done on ld 56, from :
TLP
XTON 132
XCAD 000
TLPT 0


to :

TLP
XTON 130
XCAD 30
TLPT 6

 

[johnpoole]

thanks for the update, maybe i can teach south carolina to speak your disconect tone...

john poole
bellsouth business
columbia,sc

 

[kmaksimo]

...could be an idea.....in the meantime the above config is ok for Italy.

 

[johnpoole]

other side of the globe, same software, some customers, different "southern drawl"

john poole
bellsouth business
columbia,sc