Disconnect supervision on ATA-2?

[multicaster]

Hi all,

We have a Modular 8x24, with a number of analog extensions via ATA and ATA-2 boxes.

Is any kind of disconnect supervision provided by these boxes?

I ask because I want to attach one of these extensions to an FXO port on a Cisco router, and I need to know which type of disconnect supervision to configure the router to use.

thanks a lot,
alec
--

 

[luv2ski]

nope..what about using analog trunk cards on 8x24 to fxo on cisco ...i have seen that work ..have 4 lines off a 0x32"was 8x24" over cisco from new york to virginia to an opt 11 on far side"wasnt always opt 11" never had a problem

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[multicaster]

Hi Pat,

Thanks for the reply.

I'm a bit of a Norstar dummy (I work more with the data side of things) - do you have a part number or web link for the analog trunk card you refer to?

thanks a lot,
alec
--