Disabling MSDL 1

[telepath]

I have a Dual PRI DDP2 card with 2 links and I want to restart the one at port 1.
Their ADAN is GRP 3 DNUM 4 PORT 0 & PORT 1
I want to know if the following commands will disable just one link or both:

LD 96
DIS DCH 127
DIS MSDL 4
GROUP 3 <<< THIS IS A PROMPT BY THE NORTEL
LD 60
DISL 127
LD 96
ENL MSDL 4 FDL
ENL DCH 127
LD 60
ENLL 127

PS It has the NTBK51AA daughtercard.

 

[KCFLHRC]

The DIS MSDL is for the whole card. You can however disable individual D-channels . But if you enter the DIS MSDL 4 that will take down all 4 ports.

 

[telepath]

Ok, thanks. I can deal with that. I just have to do it after hours.
I'm not sure what the "Group" means, so if I have this:
GROUP 3 MSDL 4: ENBL
GROUP 1 MSDL 10: ENBL
GROUP 3 MSDL 12: ENBL
GROUP 2 MSDL 14: ENBL
GROUP 0 MSDL 15: ENBL

The afore mentioned commands won´t mess with MSDL 12 wich has also "group 3", Right?. I have my link to the main office in that card and I really don´t want to disrupt that.

 

[KCFLHRC]

The Group # is the Network Group in which the MSDL Card resides. In an Option 81 it Starts with Network Group 0 and goes through Network Group 7. And it will only affect the MSDL card you are working on, in this case MSDL 4.

 

[telepath]

I had a vague idea of that ,thanks for the clarification.