DISABLED T1 LOOP

[coniglio]

Please tell me if the following indicates a problem with my equipment or with the carrier. Carrier says they saw errors but tested clean to the CSU. Thank you.

DTI TRK LOOP 18 - DSBL
FAULTY HW: OVERLOAD
FFMT/LCMT/YALMT: ESF/B8Z/FDL

 

[norteldude]

I hope you have a spare dti/pri card. It sounds as if your h/w which means hardware is faulty.

 

[coniglio]

Okay, thank you very much, Norteldude.

 

[johnpoole]

if your still having problems, try a loop back at the csu to your equiptment, then dis dch x in 96 and disl x the loop in 60, rcnt in 60 enll x against the loop.. if it comes up the dch will est then release wronge mode.. that would be the right response form a good hardware/software t1.

john poole
bellsouth business
columbia,sc