Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disable alarm ringing when no line is detected... 2

Status
Not open for further replies.

EPOUSERGREECE

Technical User
Jul 25, 2005
29
GR
Hello, I have a Panasonic PABX KT-TD208E with no line on ( i can not make outgoing calls at all ) , in order to communicate to each other. The problem is that the first analogue exetension rings now and then, i suppose that this is an alarm from the pabx to inform me that it has no outgoing line. Is there any way to disable this alarm??

Thank you in advance.
 
i havnt heard of any line alarm on the panasonic its more likly that you have ring back set on the ext you will have to reset all the exts

over here the command is

off hook
dial 790
you should here a long tone then hangup
however it may be differnt in the states... one of the lads here will post the code if it is differnt



peter


 
Thank you very much, i will try it and will reply to you if is was succesful
 
RIVET,
thank you very much for your help i tried it and it worked.
Do you know any other tips for this kx-td208e that could help me?
Is there any way to make a call in order to ring to all the extensions?
 
there is no group ringing on the 206 per say however CWC3 is right in saying day ringing asignment
i notice you mentioned you dont have any lines on your system.. if you are not using all 6 exts you could loop a unused slt port back to the line position and then setup the day ringing as a type of ring group...

do you have the user manuals all the tips are in it let me know



peter doyle (novacomms.net)
 
yep did that a lot back in the old kx-t days
 
The kx-td208e has 8 ext but i am using only the 4.I have a manual but it is not very detailed.It is only for installing the pbx.
Do you now if there is a manual for this model in order not to bother you? Or if there is a programmator software?
 
nice link CWC3 one i didnt have here is a star
sorry about the 206 bit our version only has 6 exts i somtimes get confused.must be showing my age....


peter (
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top