Disablabled Instruments 1

[JP26]

All,
can i print a list of disabled phones in ld 81? or is there another ld to view all disabled sets.

 

[Splic3d]

You can go card by card and do a stat l s c in LD 32.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[JP26]

THANKS

 

[RickyPone]

In ld 32
.ldis loop and shelf

 

[Splic3d]

Star Ricky, a lot less work..

Keep in mind, the disabled ports will show up with or without an actual set attached.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[JP26]

Yes i seen the disable tn my next question is how do i see all the loops if i do a stat in ld 32 i recieve the following info
000 = XCT-TDMF LOOP
00 DSBL 00 BUSY
NPR504 000

001 = XCT-CNFC LOOP
00 DSBL 00 BUSY
002 = TERM LOOP
00 DSBL 00 BUSY
003 = TERM LOOP
00 DSBL 00 BUSY
004 = SUPER LOOP
000 DSBL 021 BUSY
008 = SUPER LOOP
000 DSBL 004 BUSY
012 = PRI TRK LOOP
00 DSBL 00 BUSY NPR301
013 = PRI TRK LOOP
00 DSBL 00 BUSY NPR301
014 = PRI TRK LOOP
00 DSBL 12 BUSY NPR301
015 = PRI TRK LOOP
00 DSBL 00 BUSY NPR301
016 = XCT-TDMF LOOP
00 DSBL 00 BUSY
017 = XCT-CNFC LOOP
00 DSBL 00 BUSY
018 = PRI TRK LOOP
00 DSBL 05 BUSY NPR301
019 = PRI TRK LOOP
00 DSBL 10 BUSY NPR301
020 = SUPER LOOP
000 DSBL 011 BUSY
024 = SUPER LOOP
000 DSBL 009 BUSY
028 = PRI TRK LOOP
00 DSBL 06 BUSY NPR301
029 = PRI TRK LOOP
00 DSBL 00 BUSY NPR301
030 = PRI TRK LOOP
1. why do i see dsbl on 000 and my active loops are ????
thanks you guys rock

 

[GHTROUT]

The poster meant to do LDIS on "Loop Shelf" like this:

[tt]>LD 32
NPR000
.LDIS 116 0
NONE
.LDIS 116 1

CARD 13 UNIT 07
.
[/tt]
If you simply type STAT in LD32, that gives you the status of time slots, not TNs.

~~
Gene at www.GHTROUT.com

 

[JP26]

Thanks All I really appreciate