Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disa Problem

Status
Not open for further replies.
Dec 3, 2002
60
HU
Hi All,

I have a problem with disa number.
It works fine if it´s set up to ask auth. code for using.
But I set it up not enter auth code, it isn´t.
After entering some digits disconnecting.
Does anybody has an idea about it?
VERSION: ASB50104/10-R6/0/1/E

Best Regards
 
TRY TO SET THE MINIMUM CATEGORY TO THE DESIRED ONE IE EXCCS:CATTYP=1,CAT=CATEGORY FOR DISA WITHOUT AUTH CODE.
BE CAREFUL . DO NOT LEAVE HOLES ON YOUR SYSTEM.
 
Thx Gasmas,

That works:)Anyway I will filter to reach disa number only for one trunk in the Traffic Matrix. And this trunk is avielable for interconnected LIMS (partner companies). So no chance to crack it.

I have problems with other security things:

1. Dect phones are storing the auth codes in last dialled number. That´s why peolple are using everybodys codes.


2. Is it possible to deny using auth codes from any extension? I would be able to stop using illegal auth codes from extensions which for these function is not needed.

Thanks in advance
 
On BC9 I noticed that DISA without AUTH code works only if dialed digits have CAT=0 in NADAP. For example:
EXTERNAL/INTERNAL NUMBER CAT
6 7 6 5 4 3 2 1 0
8 4 3 2
You can dial 6 but can't dial 8.
 
If I'm not wrong, this is good - by this (ie CAT=0) You can restrict (bar) accesses for DISA w/o AUTH code... For example, You can bar to do International calls. Of cause this would be for all callers...
 
hi, all,

When I input command, aucoi:auth=5555,cat=0,cilcod=8582;
system responded: NOT Accepted, Wrong Authority Class.

The MD110 version is BC9.

Anyone know how to set this command right? If BC9 doesn't need password, what is the right command to set up DISA?
 
In our BC9 (CNI76) we have:
<iocap:com=aucoi;
COMMAND AUTHORITY DATA
COMMAND AUTHORITY
AUCOI 7
END

ie authority level 7.
 
There nothing strange at all because of fraud with DISA codes.
Very common practice...
 
Especially, Italian E/// set up this... And you know about Vietnamese attacks in Moscow at DISA... Two days - 10.000 - 15.000 $ . It's all about simple psw like 12345 .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top