DISA Disconnected

[jokkmokk]

IPLDK-20

After upgrade from 2.1 to 3.6 all stations idle text is 'DISA DISCONNECTED'. Everything else is working as expected.

If we initialize all database, (reset). All stations idle text is normal, eg. Station 100, etc...

Any suggestions?

 

[doktor]

You need to "upgrade" the system in PGM452.
Use all upgrade "buttons" 2.2 all the way up to 3.6.

Why not go to 3.8 or 3.9?

///doktor

 

[jokkmokk]

I did 'intialize' 3.6 with pc-admin.
The 3.6 was the only button available.

I'll try with an keyset instead and see what shows up.
Maybe it have some more steps to convert the database properly.

The reason why only upgrade to 3.6 is because we got this sw from our LG dealer for free of charge to solve a problem.

 

[doktor]

Check thi site:

http://www.artcom.ru/download/?TYPE=6&;MODEL=507

///doktor

 

[doktor]

The site contains a lot of good and s/w for LG.
Please use keyset admin to "upgrade" from 2.2 to 3.1 to 3.2 to 3.3 to 3.4 to 3.5 to 3.6 etc.

///doktor

 

[SteveBUK]

The ipLDK 20 using v2.1 software was bascically a version 3 software in line with the other ipLDKs... so it went from v2.1 to v3.6 in one jump...
PGM 452 will show Reserved for software levels in between.

Regards
Steve

 

[doktor]

Now you can go all the way up to 3.9, I guess.

///doktor

 

[jokkmokk]

Thanks for all replys, problem is now solved.

 

[doktor]

How did you solve it?

///doktor

 

[jokkmokk]

The solution for me was to init 3.6 from an keyset instead of doing it in pc-admin. PGM452 F9 (3.6). It didn't seem to init it att all?

The 2.2, 3.1, 3.2, 3.3, 3.4, 3.5 was not available for me.
PGM452 F1-F8 = RESERVED.

I'havent tried the 3.8/3.9 yet.
But i guess i have to work it from F9 up to F12 or F13 to init the 3.8 properly.

Thanks again.

 

[doktor]

Yes, you are right.

I always use the keyset admin for "dangerous" things like PGM100, 450 and 452.
This is what I normally recommend!

You could go all the way to 3.9...

///doktor