craigyboy007
IS-IT--Management
Can IBM Director monitor a Service Running on a server? Basically, we need to know if a service has been stopped/failed on a server and get an alert for it. Can this be done? and how?
Craig
Craig
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Director Monitoring a service
- Thread starter craigyboy007
- Start date
- Status
curran
Technical User
- Dec 4, 2003
- 16
Yes it should be able to however we don't use it for that in our environment. You may have to setup Resoure monitor to for the particular service and then tie it to an event action plan. Refer to Event action plan and resource Montior documentation.
The best thing to do is to setup an EAP to monitor the Event Log for when the service stops. Stop the service, then read the event log and copy the text from the Event Log. Then create a simple Event Filter for that event log. Usually it gets logged in System under "Service Control Manager". The Event ID is 7036, which is used for when all services are stopped. Configure the filter to only grab those with the text from the service you wish to monitor. This method is better than applying a Resource Monitor because it takes up less CPU usage on both the server and the client. Let me know if this works for you.
- Status
Similar threads
- Locked
- Question