Has anyone been able to connect a DirctPC to the network without the extra charge multiuser option. I gather the PC connection is USB and I would like to connect to a seperate piece of hardware instead of through a PC to the network.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Direct PC Routing
- Thread starter techshoot
- Start date
Did you ever get an answer to your question? I just went through the same process. I was trying to find some way to hook a firebox (firewall hardware) between the satellite idu and the network switch. I called the vendor of the firewall and the satellite provider and everybody said no. Of course the satellite vendor assured me that the connection was safe with out the firebox. So I returned the firebox.
So if there is a way, I never found it.
So if there is a way, I never found it.
stanhubble
MIS
If i remember correctly they now have another option:
DW 4020 terminal gateway is a completely self contained unit, with a Direct interface ( no need for a PC), 4 ethernet ports and built in firewall.
DW 4020 terminal gateway is a completely self contained unit, with a Direct interface ( no need for a PC), 4 ethernet ports and built in firewall.
You may want to try the satellite forum on
The guys that hang out there are the best I've found on questions about DirecWay.
The guys that hang out there are the best I've found on questions about DirecWay.
- Status
Similar threads
- Locked
- Question